Replacement Hatch Acrylics

Lewmar Ocean and Rollstop Hatches
These are some of the sizes Lewmar produced. Newer Ocean hatches have comma shaped handles on the outside instead of the 'frying pan' traditional ones. Please specify which type your hatch has when ordering, our default is the traditional handle. Rollstop 50, 60 and 70 were manufactured with alternative corner radii so you will need to check which version you have. Click the button on the left for our "handy guide".

HATCH SIZE	ACRYLIC SIZE	ACRYLIC, O rings & strut gasket	EHB tape	Total Price fitted to lid* at works
SIZE 10	270x270x10mm	£60.12	£7.50	£112.62
SIZE 20	213x358x10mm	£54.40	£7.50	£116.90
SIZE 30	338x468x10mm	£95.30	£10.50	£160.80
SIZE 50	510x380x12mm	£141.58	£12.00	£208.58
SIZE 60	511x511x12mm	£166.80	£13.50	£240.30
SIZE 63	570x570x12mm	£175.10	£14.40	£254.50
SIZE 65	610x493x12mm	£175.10	£12.37	£252.47
SIZE 66	603x603x12mm	£175.10	£15.00	£260.10
SIZE 70	630x630x12mm	£252.90	£16.50	£344.40

*There is a surcharge if you send the deck frame.

Lewmar Superhatches
These are some of the sizes Lewmar produced.

HATCH SIZE	ACRYLIC SIZE	ACRYLIC with O rings	EHB tape	Total Price fitted to lid at works*
SIZE 20	211x356x10mm	£51.90	£7.50	£114.40
SIZE 30	335x465x10mm	£92.80	£10.50	£158.30
SIZE 50	387x516x10mm	£131.70	£12.00	£198.70
SIZE 60	515x515x10mm	£140.68	£13.75	£214.43
SIZE 70	637x637x12mm	£252.80	£16.50	£344.30

*There is a surcharge if you send the deck frame.

Canpa and other similar hatches

ACRYLIC SIZE	8mm thick BRONZE/GREY	10mm thick BRONZE/GREY	12mm thick BRONZE/GREY	Fitting to lid at works*
Up to 250x250mm	£29.68	£34.60	—	£48.00
Up to 375x500mm	£75.04	£89.80	£104.56	£65.00
Up to 500x500mm	£100.22	£119.90	£139.58	£70.00
Up to 625x625mm	—	£178.75	£209.50	£80.00
Up to 750x750mm	—	£251.40	£295.68	£90.00

*There is a surcharge if you send the deck frame.

• Cutting holes for ventilators for customer to fit £7.50 each
• Cutting holes for ventilators and fitting UFO vent £15.00 each plus cost of vent
• Replacement closing seals — see Seals page
• Collection and delivery — contact us for a quote

Doing the job yourself you will also need a tube of Arbosil 1081 black sealant to fill in the gap between the acrylic and the frame once it is stuck in position and a bottle of Detak with an acrylic scraper for removing the old sealant from the frame. The lid closing seal on the hatch is not included as they are usually still in good condition and just need a wipe over with some petroleum jelly. One tube of Arbosil 1081 is enough for two or more small hatches and a bottle of Detak will be enough to do all the hatches on your boat.

Gebo Hatches

HATCH SIZE	ACRYLIC SIZE	ACRYLIC, R151 seal and 5164/12	R163 closing seal	Total Price fitted at works
530x400mm	463x330x8mm	£101.29	£32.80	£186.59
570x450mm	500x371x10mm	£167.25	£35.88	£260.88
700x690mm	620x620x12mm	£332.18	£51.25	£456.93