ARBOSIL 1081 acrylic sealant
One part silicone rubber based sealant
suitable for sealing acrylic to aluminium, glassfibre and
wood. Not suitable for stainless steel. Excellent UV resistance
and durability.
DESCRIPTION |
SIZE |
PRICE |
Arbosil 1081
Black |
300ml |
£14.00 |
ARBOSIL 1096 glass sealant
Low Modulus Silicone Sealant suitable
for sealing glass to aluminium, glassfibre and wood.
Very good UV resistance and excellent durability.
DESCRIPTION |
SIZE |
PRICE |
Arbosil 1096 Black |
380ml |
£16.50 |
ARBOSIL GZ mastic strip
This is a sealing strip based upon butyl
rubber in combination with other polymers and plasticisers
and reinforced with fillers. It is deformable under moderate
pressure, has appreciable surface tack and recovery. It can be used in a variety of
applications for sealing joints between components.
DESCRIPTION |
SIZE |
PRICE PER METRE |
Arbosil GZ
black |
50x3mm |
£5.00 |
Very high bond foam double-sided
tape
High performance acrylic foam double-sided
sticky tape. Will not ooze out in hot weather like the GZ
does. Apply pressure for 48 hours whilst adhesive cures and
then hope you won't have to take it apart again soon!
DESCRIPTION |
SIZE |
PRICE PER METRE |
16 metre ROLL |
EHB1003 white |
10x3mm |
£4.50 |
£63.00 |
EHB1203 white |
12x3mm |
£6.00 |
£77.00 |
Post and packaging: <17 metres
£4.00, 17+ metres £5.50
DETAK adhesive/sealant remover
Whilst there is no magic solution for removing
old mastic, and I have tried most, Detak, originally created
to remove chewing gum is very good at removing most sticky
substances. Cut away as much of the old mastic as you can
with a sharp knife without damaging the surface, then brush
on, leave a few minutes and then rub with a rag. Thicker layers
need to be scraped off. Use a scraper that won't damage the
surface, a piece of scrap acrylic is good for grp and aluminium
frames. We supply a free acrylic scraper with each bottle.
Due to airline regulations we cannot post this item abroad.
DESCRIPTION |
SIZE |
PRICE |
Detak |
300ml |
£7.50 |
Posting abroad: It is not possible to send
Detak by airmail.
|