Sheet Acrylic

Clear acrylic

Tinted acrylic

Acrylic items

Windows and hatches

Screw fixed windows

Weatherstrip windows

Hatch acrylic

Porthole lenses

Vetus hatches and ports

Washboards

Clear Acrylic

Tinted acrylic

Seals

Indiarubber channels

Sponge rubber seal

Sliding & hinged windows

Patent weatherstrip

Bedding seals

Finishing trims

Fixings

Self tapping screws

Machine Screws

Interscrews

Various fixings

Accessories

Ventilators

Locks

Fendering

Chandlery Bargains

Polishes and Sealants

Polish

Sealants

Catalogue and
Info sheets

Downloads

 

 

 

Westerly Owners Page
Contact us
 
 
 
 

Some Westerly specific items all together.

This is a new page so do let us know if there is anything else you think should be here. There are links on the left to generic items like hatch acylics and washboards.

Postage and packaging is not included and will depend upon the size and weight of the parcel.

Window acrylic
Replacement acrylic for the 'Marsh Walters' style of windows. If your window frame has only one join you will need to send it to me to be done, for those of you lucky enough to have a frame that splits into two parts there is advice on replacing the acrylic yourself here Refurbishing Framed Windows however we can also do these for you (see below)
6mm thick clear acrylic 612x151mm with radius corners
£25.00 each

Refurbishing Framed windows
Windows stripped down, cleaned and reassembled, then wax polished and supplied with Scapa 3507 bedding tape for refitting to the boat without using mastic.

Marsh Walters style frames 661x208mm with safety glass.

£78.83 each
Marsh Walters style frames 661x208mm with clear acrylic.
£106.33 each
Marsh Walters style frames 661x208mm with tinted acrylic.
£110.53 each
Cleaning and polishing backframes
£20.00 per window

Window fixings
Most earlier Westerly yachts have framed windows were held in by 3.5mm screws and interscrews.
The original interscrews and screws were made of chrome plated brass and you will probably find if you remove a window that some of the interscrews have failed. Others will break when you try to tighten them up again. They are all likely to be blocked up with old sealant.
We have had a special production run of stainless steel interscrews made with 3.5mm tapping. Feed back showed that Westerly owners were concerned that our other interscrews did not have slots in the heads so we specified slots with the new batch of fixings. In order to machine the slots they had to make the heads deeper.


Fixings Kits
Kits contain stainless steel interscrews, countersunk screws in 10mm, 12mm and 16mm lengths, Scapa 3507 bedding tape and a fixing guide.
£10.00 Kit for windows requiring 10 screws
£12.00 Kit for windows requiring 12 screws
£20.00 Kit for windows requiring 20 screws
£30.00 Kit for windows requiring 30 screws

1st class postage and packing for up to five kits £4.00